Compression Post and Bulkhead Repair Cont'd

Post Reply
User avatar
Mary Mac
Site Admin
Posts: 281
Joined: Thu Oct 17, 2019 11:27 am
Location: Alameda/Manhattan Beach

Thought I'd share more bulkhead and compression post install photos.
Old bulkhead with rot
Old bulkhead with rot
56782335-DE61-45C5-A462-06B7C5993075_1_105_c.jpeg (281.62 KiB) Viewed 1314 times
Fresh Hydro Tek
Fresh Hydro Tek
853EFCC2-852B-4B23-9428-4291BD0487AE_1_105_c.jpeg (263.65 KiB) Viewed 1314 times
Dry fit bulkhead
Dry fit bulkhead
B0151B00-C0D2-4782-9318-184058FA940F_1_105_c.jpeg (242.65 KiB) Viewed 1314 times
From inside head.. new compression post, new bulkhead piece, freshly glued and screwed.
From inside head.. new compression post, new bulkhead piece, freshly glued and screwed.
60F0F227-E106-4440-B178-415447EA422B_1_105_c.jpeg (224 KiB) Viewed 1314 times
Table re-attached. Ideas for covering the mis-matched surfaces?
Table re-attached. Ideas for covering the mis-matched surfaces?
98113571-45DD-4B35-A4C2-7406CB3856BE_1_105_c.jpeg (200.63 KiB) Viewed 1314 times
Table dry-fit with new holes drilled. Chainplate bolts removed to saturate bulkhead with penetrating epoxy. Will install mast wire cover later after saturating that corner with penetrating epoxy and creating a safe place for water leaks to go.
Table dry-fit with new holes drilled. Chainplate bolts removed to saturate bulkhead with penetrating epoxy. Will install mast wire cover later after saturating that corner with penetrating epoxy and creating a safe place for water leaks to go.
2DE6D5E9-3B05-4299-B18E-A5BBE2525583_1_105_c.jpeg (236.11 KiB) Viewed 1314 times
Mary
https://svmuleka.com
Muleka 1978 Cal 34-III #111 Marina Village, Alameda, California
Nepenthe 1976 Kelly Peterson 44 #116 Redondo Beach, California
Top
Post Reply

Return to “General Maintenance and Repairs”