I went to Moore Newton, a well known and impressive wood dealer in San Leandro, CA. They dug out a palette of rough cut teak and some alternatives.. the best alternative was African mahogany, but the teak is so much better, stronger, resistant to rot etc. I paid $265 for a 2”x12”x8’ board.
I took it back home to Santa Cruz and a woodworker helped me cut it. It is a beautiful piece of wood, and it was fun to see it become a new post. He sanded it and polished it with steel wool and it looks beautiful. I have some wood left over and can’t wait to fix some more things with it.
The man who helped me said that it looked like a piece of old teak; the good kind. It looked as if it had been sitting on that palette for decades.
I think I will treat the ends with penetrating epoxy, and test another area to see how it will turn out if I do the whole thing. The stuff I got from Total Boat soaks in quite well if you mix in acetone.
Photos of the process so far..
- A482AB31-FFE2-4CD5-8F0C-CEAB606871E8.jpeg (3.29 MiB) Viewed 1570 times
- 65854974-21AE-425B-A762-82139D6A4938.jpeg (3.07 MiB) Viewed 1570 times
- 280BE420-6856-496D-A222-0E7246C239C5.jpeg (3.86 MiB) Viewed 1570 times
- E20FADA0-2B22-4EFA-AE97-89994303E9F4.jpeg (3.51 MiB) Viewed 1570 times
- EE9C96AF-6A6C-4163-89FE-C91AC82AB14C.jpeg (4.09 MiB) Viewed 1570 times
- 6EFC764C-CBCB-4612-BEF7-D2FD5B85BB10.jpeg (4.43 MiB) Viewed 1570 times
- 9CB8FEAD-9922-4EEC-960B-1365F496B238.jpeg (4.01 MiB) Viewed 1570 times
