Re: [Cal_Boats] Barient Winch Plate
My boat's PO made one with a piece of aluminum, drilled for two bolts at the proper spacing. I have not yet had the occasion to use it, but he claims it works well and my slip neighbor also made on and says it works for him.
Al
>
> From: "Husar Charlie" <hu… [at] bah.com>
> Date: 2006/08/02 Wed AM 09:47:29 EDT
> To: <Ca… [at] yahoogroups.com>
> Subject: [Cal_Boats] Barient Winch Plate
>
> Hi, All. Is there actually a pair of holes, or is there just a snap
> ring type device as in the smaller winches?
>
> Cheers
> Charlie
>
> ________________________________
>
> From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On
> Behalf Of John Raxter ~~~~~_/)~~~~
> Sent: Wednesday, August 02, 2006 7:03 AM
> To: Ca… [at] yahoogroups.com
> Subject: RE: [Cal_Boats] Re: Cal 33 Barent winches
>
>
>
> Ron,
>
>
>
> I use this:
>
>
>
> http://www.westmarine.com/webapp/wcs/stores/servlet/producte/10001/-1/10
> 001/50501/0/0/deck%20wrench/All_2/mode+matchallpartial/0/0
>
>
>
>
>
> Comes in handy for those stubborn deck plates also.
>
>
>
> John
>
>
>
> ________________________________
>
> From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On
> Behalf Of Ronald Eddleman
> Sent: Tuesday, August 01, 2006 7:21 PM
> To: Ca… [at] yahoogroups.com
> Subject: Re: [Cal_Boats] Re: Cal 33 Barent winches
>
>
>
> Thanks, this was just what I was looking for. Now I will search for the
> drum tool they mention to remove the plate on top of th winch.
>
>
>
> Ron
>
> usa3732 <us… [at] yahoo.com> wrote:
>
> The C&C owners website has all the manuals and documentation for
> Barient winches.
> Scroll down the list on the left -> "Winches" is at the bottom.
>
> http://www.cncphotoalbum.com/ <http://www.cncphotoalbum.com/>
>
>
>
>
>
> ________________________________
>
> See the all-new, redesigned Yahoo.com. Check it out.
> <http://us.rd.yahoo.com/evt=40762/*http:/www.yahoo.com/preview>
>
>
>
>