3 messages2007-06-12 01:14 UTCthrough 2007-06-13 01:49 UTC
Re: [Cal_Boats] Prop Shaft Strut for cal 2-30
to… [at] aol.com2007-06-12 01:14 UTC
Hi Steve,
I don't know if this helps you or not, but in May I had a new strut made for
my Cal 29. I had it done at Marine Hardware here in Redmond, WA.
_http://www.marinehardware.com_ (http://www.marinehardware.com)
I sent them my old strut that was pretty darn pink and had a lot of cracks.
They made me a new one. I think it was around $500.00.
Here's a link to a picture of my old and new strut side by side before
putting it on in the boat yard. _http://i9.tinypic.com/4yfdi0z.jpg_
(http://i9.tinypic.com/4yfdi0z.jpg)
Gregg
Chaconne
1978
#1008
Cal 3-29
In a message dated 6/11/2007 5:34:59 P.M. Pacific Daylight Time,
ca… [at] cox.net writes:
Does anyone know where I might be able to obtain a prop shaft strut for a
Doe 2-30 or know what the dimensions for one are?
Thanks,
Steve Ritz
************************************** See what's free at http://www.aol.com.
RE: [Cal_Boats] Prop Shaft Strut for cal 2-30
Steve Ritz2007-06-12 02:22 UTC
Thanks, this will help
_____
From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf
Of to… [at] aol.com
Sent: Monday, June 11, 2007 9:14 PM
To: Ca… [at] yahoogroups.com
Subject: Re: [Cal_Boats] Prop Shaft Strut for cal 2-30
Hi Steve,
I don't know if this helps you or not, but in May I had a new strut made for
my Cal 29. I had it done at Marine Hardware here in Redmond, WA.
http://www.marineha <http://www.marinehardware.com> rdware.com
I sent them my old strut that was pretty darn pink and had a lot of cracks.
They made me a new one. I think it was around $500.00.
Here's a link to a picture of my old and new strut side by side before
putting it on in the boat yard. http://i9.tinypic.
<http://i9.tinypic.com/4yfdi0z.jpg> com/4yfdi0z.jpg
Gregg
Chaconne
1978
#1008
Cal 3-29
In a message dated 6/11/2007 5:34:59 P.M. Pacific Daylight Time,
ca… [at] cox.net writes:
Does anyone know where I might be able to obtain a prop shaft strut for a
Cal 2-30 or know what the dimensions for one are?
Thanks,
Steve Ritz
_____
See what's free at AOL.com <http://www.aol.com?ncid=AOLAOF00020000000503> .
Re: [Cal_Boats] Prop Shaft Strut for cal 2-30
ai… [at] aol.com2007-06-13 01:49 UTC
Are you located in Santa Barbara Steve?
Daniel Casey
"Air Time"
Cal 9.2R #75
Santa Barbara, Ca.
************************************** See what's free at http://www.aol.com.