Cal 27 T2

Hello, I'm new here and I need help with a Cal27-T2! I am aquiring this vessel that is missing the mast. I was hoping to get some specs or measurments on a replacement. I have found a used mast from a Catalina but not sure if it will work. Any help at all would be greatly appreciated. The boat is only setting me back a few hundred dollars and the cost to move it to my place! I can't pass it up.

Try contacting Steve Seal at http://www.sealsspars.com/ Steve used to work at Jensen and could be a great contact for parts. Incidently, I crew on a racing CAL T/2. We took 2005 San Diego PHRF Class 6 championship and the 2007 title is in the bag. Visit http://groups.yahoo.com/group/Elysium_/ which is about the T/2 I crew on. It was just equipped with a new genoa and she goes very well. Later on... Robert --- In Ca… [at] yahoogroups.com, "mike40forte" <mike40forte@...> wrote: > > Hello, > > I'm new here and I need help with a Cal27-T2! I am aquiring this vessel > that is missing the mast. I was hoping to get some specs or measurments > on a replacement. I have found a used mast from a Catalina but not sure > if it will work. Any help at all would be greatly appreciated. The boat > is only setting me back a few hundred dollars and the cost to move it > to my place! I can't pass it up. >

These are the numbers for the CAL T/2 Standard mast. If you need the numbers for the tall mast, let me know. I also have the lengths and diameters for the standing rigging. Let me know if you need these. I=35 ISP=35 J=12 SPL =12 P=27.75 E=10.25 ------------------------------------------------------------------------ -------- ---------------------------------------------------------------------- ----------

sweet..just what I was looking for. I assume it only had a standard mast. I'll take the dimensions for the standing rigging when you get a chance Bill. Thanks Mike Bill <w.… [at] sbcglobal.net> wrote: These are the numbers for the CAL T/2 Standard mast. If you need the numbers for the tall mast, let me know. I also have the lengths and diameters for the standing rigging. Let me know if you need these. I=35 ISP=35 J=12 SPL =12 P=27.75 E=10.25 ---------------------------------------------------------- -------- ---------------------------------------------------------- ---------- __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

--- In Ca… [at] yahoogroups.com, Mike Forte <mike40forte@...> wrote: > > sweet..just what I was looking for. I assume it only had a standard mast. I'll take the dimensions for the standing rigging when you get a chance Bill. > Thanks > Mike Mike: Will this help: http://sandiego.craigslist.org/boa/467657399.html