Does any one have photos Of Dreaded beam repair on cal 2-30?

I am under taking a repair of the galvanized beam beneath the mast compression post.Any suggestions or photos appreciated. Also bulkhead and chainplate repairs. Thanks

What is the configuration of the 2-30 beam? I have pictures of 29 and 3-30 beam jobs, and in fact I have a spare 3-30 beam made of 316L sitting in my studio... I made 5 of them once upon a time... and I have one left. I also made 5 of the 29 beams but they are all gone.... Does it look like one of these? The 1st picture is the 3-30, the second picture fits the 29 and the 2-29. Alan Storey Cal 3-30 Chimera Vancouver BC   On 29-Jan-08, at 6:37 AM, gabe.riley wrote: > I am under taking a repair of the galvanized beam beneath the mast > compression post.Any suggestions or photos appreciated. Also bulkhead > and chainplate repairs. > Thanks >

FWIW, I have one of Alan's beams in Nemesis. It is a piece of art, and shouldn't be covered by the floor pan. He was very helpful in providing me installation pictures and explanations. I saw a 29 beam that was made by a local fab shop, and there was simply no comparison. Quality tells Fred Haas, 3-30 Nemesis Tacoma From: Ca… [at] yahoogroups.com on behalf of Alan Storey Sent: Wed 1/30/2008 10:07 AM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] Does any one have photos Of Dreaded beam repair on cal 2-30? What is the configuration of the 2-30 beam? I have pictures of 29 and 3-30 beam jobs, and in fact I have a spare 3-30 beam made of 316L sitting in my studio... I made 5 of them once upon a time... and I have one left. I also made 5 of the 29 beams but they are all gone.... Does it look like one of these? The 1st picture is the 3-30, the second picture fits the 29 and the 2-29. Alan Storey Cal 3-30 Chimera Vancouver BC <https://mail.olympicbc.com/exchange/fred.haas/Drafts/PICT0073.jpg> <https://mail.olympicbc.com/exchange/fred.haas/Drafts/PICT0177.jpg> On 29-Jan-08, at 6:37 AM, gabe.riley wrote: I am under taking a repair of the galvanized beam beneath the mast compression post.Any suggestions or photos appreciated. Also bulkhead and chainplate repairs. Thanks