Re: [Cal_Boats] SS Stern Rail Welding (Allen)

Re: [Cal_Boats] SS Stern Rail Welding (Allen)

2 messages2009-06-19 16:48 UTCthrough 2009-06-19 16:55 UTC

Re: [Cal_Boats] SS Stern Rail Welding (Allen)

Michael D2009-06-19 16:48 UTC
Allen, I'm in south Florida (Pompano Beach) near Fort Lauderdale. --Michael-- --- On Fri, 6/19/09, Allen Edwards <al… [at] PaloAltoPhoto.com> wrote: From: Allen Edwards <al… [at] PaloAltoPhoto.com> Subject: Re: [Cal_Boats] SS Stern Rail Welding To: Ca… [at] yahoogroups.com Date: Friday, June 19, 2009, 12:42 PM I would bet I could get it welded for less than the cost of renting but then again I know a welder who loves doing small projects and doesn't charge much. Where are you located? Allen On Fri, Jun 19, 2009 at 9:27 AM, Michael D <mddfl@yahoo. com> wrote: Ahoy, Magic's stern rail snapped off where the forward starboard support was welded to the base plate. Anyone here with SS welding experience? Rather than hiring a welder, I'm considering renting a unit and doing the job myself. I did a bit of welding years ago, but never any SS. Recommendations, suggestions, stories? Thanks, --Mcihael--

Re: [Cal_Boats] SS Stern Rail Welding (Allen)

Allen Edwards2009-06-19 16:55 UTC
About as far from my welder as it is possible to be and still be in the US. Allen On Fri, Jun 19, 2009 at 9:48 AM, Michael D <md… [at] yahoo.com> wrote: > > > Allen, > > I'm in south Florida (Pompano Beach) near Fort Lauderdale. > > --Michael-- > > --- On *Fri, 6/19/09, Allen Edwards <al… [at] PaloAltoPhoto.com>*wrote: > > > From: Allen Edwards <al… [at] PaloAltoPhoto.com> > Subject: Re: [Cal_Boats] SS Stern Rail Welding > To: Ca… [at] yahoogroups.com > Date: Friday, June 19, 2009, 12:42 PM > > I would bet I could get it welded for less than the cost of renting but > then again I know a welder who loves doing small projects and doesn't charge > much. Where are you located? > > Allen > > On Fri, Jun 19, 2009 at 9:27 AM, Michael D <mddfl@yahoo. com<http://mc/compose?to=md… [at] yahoo.com> > > wrote: > >> >> >> Ahoy, >> >> Magic's stern rail snapped off where the forward starboard support was >> welded to the base plate. Anyone here with SS welding experience? Rather >> than hiring a welder, I'm considering renting a unit and doing the job >> myself. I did a bit of welding years ago, but never any SS. >> Recommendations, suggestions, stories? >> >> Thanks, >> --Mcihael-- >> >> >> > > >