RE: [Cal_Boats] Jabsco raw water pump on Cal 34

http://www.jabsco.com/products/marine/engine_cooling_pumps/impeller_removal_tool_50070_series/iid_191/index.htm is a link to jabsco puller. Never used one. looks nice. Chuck --- On Mon, 6/22/09, Harleigh Ewell <he… [at] comcast.net> wrote: From: Harleigh Ewell <he… [at] comcast.net> Subject: RE: [Cal_Boats] Jabsco raw water pump on Cal 34 To: Ca… [at] yahoogroups.com Date: Monday, June 22, 2009, 8:56 PM This is not exclusively a Cal issue but common to anyone with an inboard. I'm having trouble pulling the impeller from my Jabsco 5320 raw water pump. I cannot find a manual or instructions to confirm the right method so I'm wondering if there is something I am overlooking. I am trying to install all the bits from the new parts kit, including the impellor before reinstalling everything else on my Westerbeke. I have grabbed the impeller by the rubber-coated center with pliers and pulled with all my super human strength. It will not budge. Has anyone else struggled with this and found a solution? Cheers, Dan