8 messages2010-03-02 20:03 through 2010-03-09 02:02
cal 40 mast height for bridge clearance??
r_michael_taylor2010-03-02 20:03
sailboatdata.com offers I and P dimensions, but not total height for bridge clearance. anyone know it for a cal 40 with original mast? I'm guessing 55' with some tolerance...
RE: [Cal_Boats] cal 40 mast height for bridge clearance??
ti… [at] ch2m.com2010-03-02 20:41 UTC
@49'10" when the truck hits bridge in flat water 55' sounds good.
[cid:image003.jpg@01CABA05.A872A950]
From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of r_michael_taylor
Sent: Tuesday, March 02, 2010 12:03 PM
To: Ca… [at] yahoogroups.com
Subject: [Cal_Boats] cal 40 mast height for bridge clearance??
sailboatdata.com offers I and P dimensions, but not total height for bridge clearance. anyone know it for a cal 40 with original mast? I'm guessing 55' with some tolerance...
drawings (Simon?)
r good2010-03-02 20:47 UTC
is there a similar drawing of the Cruising 36?
Reggie
To: Ca… [at] yahoogroups.com
From: ti… [at] ch2m.com
Date: Tue, 2 Mar 2010 13:41:19 -0700
Subject: RE: [Cal_Boats] cal 40 mast height for bridge clearance??
@49’10” when the truck hits bridge in flat water 55’ sounds good.
From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of r_michael_taylor
Sent: Tuesday, March 02, 2010 12:03 PM
To: Ca… [at] yahoogroups.com
Subject: [Cal_Boats] cal 40 mast height for bridge clearance??
sailboatdata.com offers I and P dimensions, but not total height for bridge clearance. anyone know it for a cal 40 with original mast? I'm guessing 55' with some tolerance...
Re: drawings (Simon?)
r_michael_taylor2010-03-03 18:41
Is the question "does sailboatdata.com havve a cruising 36 drawing"?
this what you're looking for?
http://www.sailboatdata.com/viewrecord.asp?class_ID=1598
--- In Ca… [at] yahoogroups.com, r good <my1972ih@...> wrote:
>
>
> is there a similar drawing of the Cruising 36?
>
> Reggie
>
>
>
> To: Ca… [at] yahoogroups.com
> From: timmothy.lessley@...
> Date: Tue, 2 Mar 2010 13:41:19 -0700
> Subject: RE: [Cal_Boats] cal 40 mast height for bridge clearance??
>
>
>
>
>
>
>
>
>
> @49'10" when the truck hits bridge in flat water 55' sounds good.
>
>
>
>
>
>
> From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of r_michael_taylor
> Sent: Tuesday, March 02, 2010 12:03 PM
> To: Ca… [at] yahoogroups.com
> Subject: [Cal_Boats] cal 40 mast height for bridge clearance??
>
>
>
>
>
> sailboatdata.com offers I and P dimensions, but not total height for bridge clearance. anyone know it for a cal 40 with original mast? I'm guessing 55' with some tolerance...
>
CAL drawings
r good2010-03-07 10:21 UTC
that's the one. thanks.
Although, look at the difference paint makes? compare the picture in the link to the photo attached. To my eye, the link photo looks antique and the asme boat painted looks modern. folks often ask us about "Submit" age and are surprised.
Reggie
To: Ca… [at] yahoogroups.com
From: r_… [at] yahoo.com
Date: Wed, 3 Mar 2010 18:41:14 +0000
Subject: [Cal_Boats] Re: drawings (Simon?)
Is the question "does sailboatdata.com havve a cruising 36 drawing"?
this what you're looking for?
http://www.sailboatdata.com/viewrecord.asp?class_ID=1598
--- In Ca… [at] yahoogroups.com, r good <my1972ih@...> wrote:
>
>
> is there a similar drawing of the Cruising 36?
>
> Reggie
>
>
>
> To: Ca… [at] yahoogroups.com
> From: timmothy.lessley@...
> Date: Tue, 2 Mar 2010 13:41:19 -0700
> Subject: RE: [Cal_Boats] cal 40 mast height for bridge clearance??
>
>
>
>
>
>
>
>
>
> @49'10" when the truck hits bridge in flat water 55' sounds good.
>
>
>
>
>
>
> From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of r_michael_taylor
> Sent: Tuesday, March 02, 2010 12:03 PM
> To: Ca… [at] yahoogroups.com
> Subject: [Cal_Boats] cal 40 mast height for bridge clearance??
>
>
>
>
>
> sailboatdata.com offers I and P dimensions, but not total height for bridge clearance. anyone know it for a cal 40 with original mast? I'm guessing 55' with some tolerance...
>
Re: CAL drawings
r_michael_taylor2010-03-07 20:02
I don't see any attached pic.
--- In Ca… [at] yahoogroups.com, r good <my1972ih@...> wrote:
>
>
> that's the one. thanks.
>
>
>
> Although, look at the difference paint makes? compare the picture in
the link to the photo attached. To my eye, the link photo looks antique
and the asme boat painted looks modern. folks often ask us about
"Submit" age and are surprised.
>
>
>
> Reggie
>
>
>
> To: Ca… [at] yahoogroups.com
> From: r_michael_taylor@...
> Date: Wed, 3 Mar 2010 18:41:14 +0000
> Subject: [Cal_Boats] Re: drawings (Simon?)
>
>
>
>
>
> Is the question "does sailboatdata.com havve a cruising 36 drawing"?
>
> this what you're looking for?
>
> http://www.sailboatdata.com/viewrecord.asp?class_ID=1598
>
> --- In Ca… [at] yahoogroups.com, r good my1972ih@ wrote:
> >
> >
> > is there a similar drawing of the Cruising 36?
> >
> > Reggie
> >
> >
> >
> > To: Ca… [at] yahoogroups.com
> > From: timmothy.lessley@
> > Date: Tue, 2 Mar 2010 13:41:19 -0700
> > Subject: RE: [Cal_Boats] cal 40 mast height for bridge clearance??
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > @49'10" when the truck hits bridge in flat water 55' sounds good.
> >
> >
> >
> >
> >
> >
> > From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com]
On Behalf Of r_michael_taylor
> > Sent: Tuesday, March 02, 2010 12:03 PM
> > To: Ca… [at] yahoogroups.com
> > Subject: [Cal_Boats] cal 40 mast height for bridge clearance??
> >
> >
> >
> >
> >
> > sailboatdata.com offers I and P dimensions, but not total height for
bridge clearance. anyone know it for a cal 40 with original mast? I'm
guessing 55' with some tolerance...
> >
>
RE: [Cal_Boats] Re: CAL drawings
r good2010-03-07 21:20 UTC
did I forget? trying again
Reggie
To: Ca… [at] yahoogroups.com
From: r_… [at] yahoo.com
Date: Sun, 7 Mar 2010 20:02:11 +0000
Subject: [Cal_Boats] Re: CAL drawings
I don't see any attached pic.
--- In Ca… [at] yahoogroups.com, r good <my1972ih@...> wrote:
>
>
> that's the one. thanks.
>
>
>
> Although, look at the difference paint makes? compare the picture in
the link to the photo attached. To my eye, the link photo looks antique
and the asme boat painted looks modern. folks often ask us about
"Submit" age and are surprised.
>
>
>
> Reggie
>
>
>
> To: Ca… [at] yahoogroups.com
> From: r_michael_taylor@...
> Date: Wed, 3 Mar 2010 18:41:14 +0000
> Subject: [Cal_Boats] Re: drawings (Simon?)
>
>
>
>
>
> Is the question "does sailboatdata.com havve a cruising 36 drawing"?
>
> this what you're looking for?
>
> http://www.sailboatdata.com/viewrecord.asp?class_ID=1598
>
> --- In Ca… [at] yahoogroups.com, r good my1972ih@ wrote:
> >
> >
> > is there a similar drawing of the Cruising 36?
> >
> > Reggie
> >
> >
> >
> > To: Ca… [at] yahoogroups.com
> > From: timmothy.lessley@
> > Date: Tue, 2 Mar 2010 13:41:19 -0700
> > Subject: RE: [Cal_Boats] cal 40 mast height for bridge clearance??
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > @49'10" when the truck hits bridge in flat water 55' sounds good.
> >
> >
> >
> >
> >
> >
> > From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com]
On Behalf Of r_michael_taylor
> > Sent: Tuesday, March 02, 2010 12:03 PM
> > To: Ca… [at] yahoogroups.com
> > Subject: [Cal_Boats] cal 40 mast height for bridge clearance??
> >
> >
> >
> >
> >
> > sailboatdata.com offers I and P dimensions, but not total height for
bridge clearance. anyone know it for a cal 40 with original mast? I'm
guessing 55' with some tolerance...
> >
>
Re: CAL drawings
r_michael_taylor2010-03-09 02:02
nice!
--- In Ca… [at] yahoogroups.com, r good <my1972ih@...> wrote:
>
>
> did I forget? trying again
>
> Reggie
>
>
>
>
>
> To: Ca… [at] yahoogroups.com
> From: r_michael_taylor@...
> Date: Sun, 7 Mar 2010 20:02:11 +0000
> Subject: [Cal_Boats] Re: CAL drawings
>
>
>
>
>
>
> I don't see any attached pic.
>
> --- In Ca… [at] yahoogroups.com, r good <my1972ih@> wrote:
> >
> >
> > that's the one. thanks.
> >
> >
> >
> > Although, look at the difference paint makes? compare the picture in
> the link to the photo attached. To my eye, the link photo looks antique
> and the asme boat painted looks modern. folks often ask us about
> "Submit" age and are surprised.
> >
> >
> >
> > Reggie
> >
> >
> >
> > To: Ca… [at] yahoogroups.com
> > From: r_michael_taylor@
> > Date: Wed, 3 Mar 2010 18:41:14 +0000
> > Subject: [Cal_Boats] Re: drawings (Simon?)
> >
> >
> >
> >
> >
> > Is the question "does sailboatdata.com havve a cruising 36 drawing"?
> >
> > this what you're looking for?
> >
> > http://www.sailboatdata.com/viewrecord.asp?class_ID=1598
> >
> > --- In Ca… [at] yahoogroups.com, r good my1972ih@ wrote:
> > >
> > >
> > > is there a similar drawing of the Cruising 36?
> > >
> > > Reggie
> > >
> > >
> > >
> > > To: Ca… [at] yahoogroups.com
> > > From: timmothy.lessley@
> > > Date: Tue, 2 Mar 2010 13:41:19 -0700
> > > Subject: RE: [Cal_Boats] cal 40 mast height for bridge clearance??
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > @49'10" when the truck hits bridge in flat water 55' sounds good.
> > >
> > >
> > >
> > >
> > >
> > >
> > > From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com]
> On Behalf Of r_michael_taylor
> > > Sent: Tuesday, March 02, 2010 12:03 PM
> > > To: Ca… [at] yahoogroups.com
> > > Subject: [Cal_Boats] cal 40 mast height for bridge clearance??
> > >
> > >
> > >
> > >
> > >
> > > sailboatdata.com offers I and P dimensions, but not total height for
> bridge clearance. anyone know it for a cal 40 with original mast? I'm
> guessing 55' with some tolerance...
> > >
> >
>