Re: [Cal_Boats] cutlass bearing
What is the prop shaft dameter?
Joe D
From: Robert Weiss
Sent: Mar 25, 2010 4:17 PM
To: Ca… [at] yahoogroups.com
Subject: [Cal_Boats] cutlass bearing
Hello:
I am having trouble determining the dimenions of my cutlass bearing.
It does not seem to have a metal outer sleeve. My boat is a Cal 31 (1982).
I have measured the OD of the bearing as 1-1/8, but all the cutlass brgs. I have
seen are listed as 1-1/4 OD.
Can anyone help me with the dimensions.
Thank You,