Propane System Pluming

Propane System Pluming

3 messages2010-05-05 22:18 through 2010-05-05 22:54

Propane System Pluming

James2010-05-05 22:18
Adding a Dickensen Propane stove...have a galley propane system. What is the advice on where to "tee" off of the plumbing for the Dickensen? I'd like to tee off of the plumbing at the galley stove as I would need to have a 30' run of extra propane line to install a "two-stage" regulator back at the tank.

Re: [Cal_Boats] Propane System Pluming

Fred Haas2010-05-05 22:51 UTC
James, I, too have a Dickinson Newport Propane bulkhead heater. It will bake you out of the boat if you ask it to. The bad news, I think, is that ABYC wants a home run from the propane locker to each appliance. Something about avoidiing your friends hear about you on the evening news. Have fun Fred Haas 3-30 Nemesis Tacoma On May 5, 2010, at 3:18 PM, James wrote: > Adding a Dickensen Propane stove...have a galley propane system. > What is the advice on where to "tee" off of the plumbing for the > Dickensen? I'd like to tee off of the plumbing at the galley stove > as I would need to have a 30' run of extra propane line to install > a "two-stage" regulator back at the tank. > >

Re: Propane System Pluming

James2010-05-05 22:54
Yep...that's how I read it. Here comes the 30 ft hose! Thanks --- In Ca… [at] yahoogroups.com, Fred Haas <oldrower@...> wrote: > > James, I, too have a Dickinson Newport Propane bulkhead heater. It > will bake you out of the boat if you ask it to. The bad news, I > think, is that ABYC wants a home run from the propane locker to each > appliance. Something about avoidiing your friends hear about you on > the evening news. > Have fun > Fred Haas > 3-30 Nemesis > Tacoma > > > > > On May 5, 2010, at 3:18 PM, James wrote: > > > Adding a Dickensen Propane stove...have a galley propane system. > > What is the advice on where to "tee" off of the plumbing for the > > Dickensen? I'd like to tee off of the plumbing at the galley stove > > as I would need to have a 30' run of extra propane line to install > > a "two-stage" regulator back at the tank. > > > > >