Lapworth slaute "NOAH'S KID"

Opening Day is may 15th (for south BAY)...we have dinners parties lunch breakfast prade ....I would propose a WILD BILL LAPWORTH SLAUTE ..for opening day all Lapworths ,Jensens , Cals , islander 44 any boat design by "WILD BILL" Lapworth come to REDWOOD CITY CA. and join us on MAY 15 2011...any takers edward here s Helen Kate & Kinney last year thanks

Nice 29 Helen...very nice. /ch

Looked in the archives & could not find anything on "drawer pulls". Is there any manufacturer out there who made replacements for the drawer pulls installed on 1960s-1970s Cals? Damn things are plastic & mine are old & brittle. Some are broken & I would like to replace all of them. Anybody find a good replacement, or even a "match" for these? Thanks in advance - Dyer Honu, Cal 2-30 #87. SF Bay.

Hi, Dyer. Don't know if any original plastic pulls are around, but I found some teak ones that fit well. Have used them in a CAL 25 with good result. http://www.buckwoodcraft.com/teak_molding.htm#Teak%20Bungs,%20Drawer%20Pulls%20&%20Face%20Plates Item AFI 60135 -- 2-Pack Rectangular Drawer Pull. Length: 3-1/4". Recess: 1/2" $5.50 Hope This Helps Cheers Charlie From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of Crouch, Dyer Sent: Monday, March 21, 2011 4:50 PM To: Ca… [at] yahoogroups.com Subject: [Cal_Boats] Drawer Pulls Looked in the archives & could not find anything on "drawer pulls". Is there any manufacturer out there who made replacements for the drawer pulls installed on 1960s-1970s Cals? Damn things are plastic & mine are old & brittle. Some are broken & I would like to replace all of them. Anybody find a good replacement, or even a "match" for these? Thanks in advance - Dyer Honu, Cal 2-30 #87. SF Bay.

Hi, I bought a bunch from Minneys about 20 years ago. I think I still have some extras on Satori. I will look tomorrow and reply. How many do you want? Tom and Bobbie Vandiver, Cal Cruising 46 Hull #3, Satori From: "Crouch, Dyer" <dx… [at] pge.com> To: Ca… [at] yahoogroups.com Sent: Mon, March 21, 2011 3:50:04 PM Subject: [Cal_Boats] Drawer Pulls Looked in the archives & could not find anything on "drawer pulls". Is there any manufacturer out there who made replacements for the drawer pulls installed on 1960s-1970s Cals? Damn things are plastic & mine are old & brittle. Some are broken & I would like to replace all of them. Anybody find a good replacement, or even a "match" for these? Thanks in advance - Dyer Honu, Cal 2-30 #87. SF Bay.

I put new drawer faces on and a new cupboard drawer a couple of years ago. These are an exact match for my Cal 25. http://www.bainbridgestore.com/servlet/the-Drawer-Pulls-cln-1710/Categories Kevin Cal 25 #1285 On 3/21/2011 4:50 PM, Crouch, Dyer wrote: > > Looked in the archives & could not find anything on "drawer pulls". Is > there any manufacturer out there who made replacements for the drawer > pulls installed on 1960s-1970s Cals? Damn things are plastic & mine > are old & brittle. Some are broken & I would like to replace all of them. > Anybody find a good replacement, or even a "match" for these? > Thanks in advance - > Dyer > Honu, Cal 2-30 #87. > SF Bay. >

Charlie: This web site drives me crazy. I can ALWAYS find a bunch of stuff I'd like to have. It's almost better than my wife's Victoria Secret catalogs. Danny --- In Ca… [at] yahoogroups.com, "Husar, Charlie [USA]" <husar_charlie@...> wrote: > > Hi, Dyer. Don't know if any original plastic pulls are around, but I found some teak ones that fit well. Have used them in a CAL 25 with good result. > > http://www.buckwoodcraft.com/teak_molding.htm#Teak%20Bungs,%20Drawer%20Pulls%20&%20Face%20Plates > > Item AFI 60135 -- 2-Pack Rectangular Drawer Pull. > Length: 3-1/4". Recess: 1/2" > $5.50 > > Hope This Helps > Cheers > Charlie > ________________________________ > From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of Crouch, Dyer > Sent: Monday, March 21, 2011 4:50 PM > To: Ca… [at] yahoogroups.com > Subject: [Cal_Boats] Drawer Pulls > > > > Looked in the archives & could not find anything on "drawer pulls". Is there any manufacturer out there who made replacements for the drawer pulls installed on 1960s-1970s Cals? Damn things are plastic & mine are old & brittle. Some are broken & I would like to replace all of them. > > Anybody find a good replacement, or even a "match" for these? > > Thanks in advance - > Dyer > Honu, Cal 2-30 #87. > SF Bay. >

Yeah, I know, Danny. I bought a bunch of extra stuff I was sure I'd find a good use for. Still working on it. Glad to be spreading some vicarious happiness. One word of caution. The corner teak pieces around counters and seats on the old CALs are 1" radius (at least on the 25). The parts they have on the site are 2" radius. Best measure before getting these. Anybody want some 2" radius corners? (I only learn by hard experience.) Cheers Charlie From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of Danny Sent: Monday, March 21, 2011 7:47 PM To: Ca… [at] yahoogroups.com Subject: [Cal_Boats] Re: Drawer Pulls Charlie: This web site drives me crazy. I can ALWAYS find a bunch of stuff I'd like to have. It's almost better than my wife's Victoria Secret catalogs. Danny --- In Ca… [at] yahoogroups.com, "Husar, Charlie [USA]" <husar_charlie@...> wrote: > > Hi, Dyer. Don't know if any original plastic pulls are around, but I found some teak ones that fit well. Have used them in a CAL 25 with good result. > > http://www.buckwoodcraft.com/teak_molding.htm#Teak%20Bungs,%20Drawer%2 > 0Pulls%20&%20Face%20Plates > > Item AFI 60135 -- 2-Pack Rectangular Drawer Pull. > Length: 3-1/4". Recess: 1/2" > $5.50 > > Hope This Helps > Cheers > Charlie > ________________________________ > From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On > Behalf Of Crouch, Dyer > Sent: Monday, March 21, 2011 4:50 PM > To: Ca… [at] yahoogroups.com > Subject: [Cal_Boats] Drawer Pulls > > > > Looked in the archives & could not find anything on "drawer pulls". Is there any manufacturer out there who made replacements for the drawer pulls installed on 1960s-1970s Cals? Damn things are plastic & mine are old & brittle. Some are broken & I would like to replace all of them. > > Anybody find a good replacement, or even a "match" for these? > > Thanks in advance - > Dyer > Honu, Cal 2-30 #87. > SF Bay. > ------------------------------------ Yahoo! Groups Links

I love this site. Good find, Kevin. Last time I saw any of these was years ago at Thomas Hardware (near Bayview Yacht Club in Detroit). It is the Detroit Minnie's equivalent. There were a few in a drawer in a corner. I bought what they had. Cheers Charlie Annapolis From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of Kevin Swart Sent: Monday, March 21, 2011 7:29 PM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] Drawer Pulls I put new drawer faces on and a new cupboard drawer a couple of years ago. These are an exact match for my Cal 25. http://www.bainbridgestore.com/servlet/the-Drawer-Pulls-cln-1710/Categories Kevin Cal 25 #1285 On 3/21/2011 4:50 PM, Crouch, Dyer wrote: Looked in the archives & could not find anything on "drawer pulls". Is there any manufacturer out there who made replacements for the drawer pulls installed on 1960s-1970s Cals? Damn things are plastic & mine are old & brittle. Some are broken & I would like to replace all of them. Anybody find a good replacement, or even a "match" for these? Thanks in advance - Dyer Honu, Cal 2-30 #87. SF Bay.

can you measure recess size, length, width and depth and screw to screw on center? I believe my cabinet supply place has buckets of them, they are frequently used on set-up/knockdown displays for things like sunglasses, they set them in at the bottom to lift and move the display cases. (where I got mine after they knocked it down). Helen From: "Crouch, Dyer" <dx… [at] pge.com> To: Ca… [at] yahoogroups.com Sent: Mon, March 21, 2011 1:50:04 PM Subject: [Cal_Boats] Drawer Pulls Looked in the archives & could not find anything on "drawer pulls". Is there any manufacturer out there who made replacements for the drawer pulls installed on 1960s-1970s Cals? Damn things are plastic & mine are old & brittle. Some are broken & I would like to replace all of them. Anybody find a good replacement, or even a "match" for these? Thanks in advance - Dyer Honu, Cal 2-30 #87. SF Bay.

Me too! Mine are gone and I just use the indents to open everything. Randy CAL 2-29 # 512 Out Patient Chammel Islands Ca From: Helen Horn <he… [at] sbcglobal.net> To: Ca… [at] yahoogroups.com Sent: Mon, March 21, 2011 8:04:00 PM Subject: Re: [Cal_Boats] Drawer Pulls can you measure recess size, length, width and depth and screw to screw on center? I believe my cabinet supply place has buckets of them, they are frequently used on set-up/knockdown displays for things like sunglasses, they set them in at the bottom to lift and move the display cases. (where I got mine after they knocked it down). Helen From: "Crouch, Dyer" <dx… [at] pge.com> To: Ca… [at] yahoogroups.com Sent: Mon, March 21, 2011 1:50:04 PM Subject: [Cal_Boats] Drawer Pulls Looked in the archives & could not find anything on "drawer pulls". Is there any manufacturer out there who made replacements for the drawer pulls installed on 1960s-1970s Cals? Damn things are plastic & mine are old & brittle. Some are broken & I would like to replace all of them. Anybody find a good replacement, or even a "match" for these? Thanks in advance - Dyer Honu, Cal 2-30 #87. SF Bay.