FW: Suggestions: Anti foul protection for prop and shaft

Here is a recommendation from a friend in the "Biz". They run yard services for Kentmorr Marina on the Chesapeake side of Kent Island. They now have two CAL 25 racing skippers on staff. Cheers Charlie From: Marty Lostrom [mailto:md… [at] gmail.com] Sent: Thursday, May 05, 2011 12:36 PM To: Husar, Charlie [USA] Subject: RE: Suggestions: Anti foul protection for prop and shaft We are a big fan of Prop Speed - for both our powerboats and sailboats... Once you use you, you love it and it works great. We apply it - takes multiple steps to apply. It is a little pricey but in the long run well worth it. Here is more info on it - http://www.propspeedusa.com/ Thanks, Marty From: Husar, Charlie [USA] [mailto:hu… [at] bah.com] Sent: Thursday, May 05, 2011 11:49 AM To: Lostrom Erik (er… [at] aol.com); Marty Lostrom; Chris Sullivan Subject: Suggestions: Anti foul protection for prop and shaft Hi, Folks. Do you know if this works? Cheers Charlie From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of Joe DeMers Sent: Thursday, May 05, 2011 10:42 AM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] Suggestions: Anti foul protection for prop and shaft Last year we had a bumper crop of barnacles in North Cove, Old Saybrook. Before launch, I sprayed zinc onto the prop, 3 coats, and left the shaft uncoated as a control. When hauled in the fall, the shaft was completely barnacle covered, the prop was clean. I was convinced ! Joe DeMers