Cal-40 Mast Trivia

Ok folks, I'm at a loss! I know Lefiell made most of the extrusions for the Cal-40 mast. However, when I go to their site looking for replacement tangs, their stuff looks nothing like what we have aboard /Celtic Naut/. Our mast was built in sections as if it were shipped over in a container and assembled here. (Imagine a very strong, stitched together Franken-mast) Doe`s anyone know who made those mast sections? Mike M.

Buzz Ballenger has the answer to every question you could ask. bu… [at] worldnet.att.net<mailto:bu… [at] worldnet.att.net> www.ballengerspars.com<http://www.ballengerspars.com> He is a MASTer of Spars. 215 Walker Street Watsonville, CA 95076 831-763-1196 From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of mike Sent: Wednesday, August 17, 2011 2:50 PM To: Ca… [at] yahoogroups.com Subject: [Cal_Boats] Cal-40 Mast Trivia Ok folks, I'm at a loss! I know Lefiell made most of the extrusions for the Cal-40 mast. However, when I go to their site looking for replacement tangs, their stuff looks nothing like what we have aboard Celtic Naut. Our mast was built in sections as if it were shipped over in a container and assembled here. (Imagine a very strong, stitched together Franken-mast) Doe`s anyone know who made those mast sections? Mike M.

Thanks, I'll let you all know what I find out... Mike M. On 8/17/2011 5:05 PM, ti… [at] ch2m.com wrote: > > > Buzz Ballenger has the answer to every question you could ask. > > bu… [at] worldnet.att.net <mailto:bu… [at] worldnet.att.net> > > www.ballengerspars.com <http://www.ballengerspars.com> > > He is a MASTer of Spars. > > 215 Walker Street > > Watsonville, CA 95076 > > 831-763-1196 > > *From:*Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] > *On Behalf Of *mike > *Sent:* Wednesday, August 17, 2011 2:50 PM > *To:* Ca… [at] yahoogroups.com > *Subject:* [Cal_Boats] Cal-40 Mast Trivia > > Ok folks, I'm at a loss! I know Lefiell made most of the extrusions > for the Cal-40 mast. However, when I go to their site looking for > replacement tangs, their stuff looks nothing like what we have aboard > /Celtic Naut/. Our mast was built in sections as if it were shipped > over in a container and assembled here. (Imagine a very strong, > stitched together Franken-mast) Doe`s anyone know who made those mast > sections? > Mike M. > > > >