Cal 2-29 Transverse Beam Replacement Part

What should I expect to pay to have a new beam fabricated and any leads in SoCal on shops who can do this kind of work? I looked at the tab under the settee and it has some disoloration - not like Mariposa but still.. has to be done at some point! Thanks in advance!

Cant help you with the first item. But with the second, from what I have read on line, sorry cant find the URL, its a lot easier to tackle this job from the head side as you can slice the pan down the center once the vanity is removed. Just a thought. Will see if I can dig up the URL.... Sorry cant find it anymore. The guy sold his 29 to buy an Ingred and then sold her to buy who knows what. Thats where I found the pics....:) On a different note....here's a Canadian on a CAL2-29 crossing the pacific again as Darcy did many years ago. Interesting what these boats can do. http://www.tyc.ca/offshore.htm Enjoy. /ch On Wed, Feb 8, 2012 at 9:08 PM, <to… [at] yahoo.com> wrote: > What should I expect to pay to have a new beam fabricated and any leads in SoCal on shops who can do this kind of work? I looked at the tab under the settee and it has some disoloration - not like Mariposa but still.. has to be done at some point! > Thanks in advance! > > > > ------------------------------------ > > Yahoo! Groups Links > > > -- /ch

Someone with an artistic bent made some CAL 30 beams as I recall (maybe some 29s?). I did some digging in my copious archives (E-Mail pack rat that I am). Came up with Alan Storey as a possibility? Best of Luck Charlie From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of chris123 Sent: Wednesday, February 08, 2012 10:17 PM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] Cal 2-29 Transverse Beam Replacement Part Cant help you with the first item. But with the second, from what I have read on line, sorry cant find the URL, its a lot easier to tackle this job from the head side as you can slice the pan down the center once the vanity is removed. Just a thought. Will see if I can dig up the URL.... Sorry cant find it anymore. The guy sold his 29 to buy an Ingred and then sold her to buy who knows what. Thats where I found the pics....:) On a different note....here's a Canadian on a CAL2-29 crossing the pacific again as Darcy did many years ago. Interesting what these boats can do. http://www.tyc.ca/offshore.htm Enjoy. /ch On Wed, Feb 8, 2012 at 9:08 PM, <to… [at] yahoo.com> wrote: > What should I expect to pay to have a new beam fabricated and any leads in SoCal on shops who can do this kind of work? I looked at the tab under the settee and it has some disoloration - not like Mariposa but still.. has to be done at some point! > Thanks in advance! > > > > ------------------------------------ > > Yahoo! Groups Links >

Alan Storey made my museum quality beam for Nemesis. I have his email as Alan Storey <fo… [at] shaw.ca> Also have him as as… [at] axion.net. Fred Haas 3-30 Nemesis Tacoma On Feb 8, 2012, at 7:35 PM, Husar, Charlie [USA] (ASE) wrote: > Someone with an artistic bent made some CAL 30 beams as I recall > (maybe some 29s?). I did some digging in my copious archives (E- > Mail pack rat that I am). Came up with Alan Storey as a possibility? > > Best of Luck > Charlie > > -----Original Message----- > From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] > On Behalf Of chris123 > Sent: Wednesday, February 08, 2012 10:17 PM > To: Ca… [at] yahoogroups.com > Subject: Re: [Cal_Boats] Cal 2-29 Transverse Beam Replacement Part > > Cant help you with the first item. But with the second, from what I > have read on line, sorry cant find the URL, its a lot easier to > tackle this job from the head side as you can slice the pan down > the center once the vanity is removed. Just a thought. Will see if > I can dig up the URL.... > > Sorry cant find it anymore. The guy sold his 29 to buy an Ingred > and then sold her to buy who knows what. Thats where I found the > pics....:) > > On a different note....here's a Canadian on a CAL2-29 crossing the > pacific again as Darcy did many years ago. Interesting what these > boats can do. > > http://www.tyc.ca/offshore.htm > > Enjoy. > > /ch > > On Wed, Feb 8, 2012 at 9:08 PM, <to… [at] yahoo.com> wrote: > > What should I expect to pay to have a new beam fabricated and any > leads in SoCal on shops who can do this kind of work? I looked at > the tab under the settee and it has some disoloration - not like > Mariposa but still.. has to be done at some point! > > Thanks in advance! > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >