Re: [Cal_Boats] Cal 35 MK II (Chris)
jt… [at] aol.com2012-03-20 01:39 UTC
Hi Chris,
I have a 1984 Cal35 II located about 100 miles south of you on Wheeler
Lake, Joe Wheeler Marina, Rogersville, AL We have had her for 11 years and
really enjoyed her. Ours has a quarter berth on the starboard side and 5'
draft. We have not found replacements for the aluminum framed fixed windows.
The engine is Universal 5432. If I can answer any questions, I would be
happy to.
Tim Odom
Whisper the Wind
RE: [Cal_Boats] Cal 35 MK II (Chris)
Husar, Charlie [USA] (ASE)2012-03-20 01:55 UTC
Tim, did you check with Mark Plastics in Corona, CA? As Timm pointed out, they are plastic framed, but Mark Heacox has window templates for tons of different boat designs. The comp[any originated as Go Windows, and made the original windows for CALs. I have the plastic framed windows two of my boats, and they work well.
Cheers
Charlie
Annapolis
From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of jt… [at] aol.com
Sent: Monday, March 19, 2012 9:40 PM
To: Ca… [at] yahoogroups.com
Subject: Re: [Cal_Boats] Cal 35 MK II (Chris)
Hi Chris,
I have a 1984 Cal35 II located about 100 miles south of you on Wheeler Lake, Joe Wheeler Marina, Rogersville, AL We have had her for 11 years and really enjoyed her. Ours has a quarter berth on the starboard side and 5' draft. We have not found replacements for the aluminum framed fixed windows. The engine is Universal 5432. If I can answer any questions, I would be happy to.
Tim Odom
Whisper the Wind