refurbushing 1967 Cal 28 flushdeck ...

Trying to get our Cal 28 flushdeck ready to go on the Delta Doh Dah ... and have several things to finish off ... any assistance would be greatly appreciated ... hauling out in 3 weeks ... need to replace standing rigging as well as running rigging ... top priority for the moment ... thanks in advance

Hello. Good to have you with us. A lot of knowledge on many CAL types on this list. We are on a first name basis here. I would have thought the Delta Doo Dah would be Gulf Coast, but I find it to be SF. Where does your boat live? The Sugar Barge Resort looks cute. Rarely see the mixing of RVs and sailboats around here. Each side considers the other to be from the wrong side of the tracks. Will the mast be dropped on the haul-out? Pretty much a necessity for the running rigging replacement. Have you detected defects? For the running rigging, do you have lines coming back to the cockpit? The running rigging is very much of a personalized arrangement depending on how you sail. The CAL 25 and CAL 28 would be very similar in how they set up. Both are flat decks with deck stepped mast. Cheers Charlie Annapolis CAL 25s and CAL 40 From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of jreissenweber Sent: Monday, May 14, 2012 1:15 AM To: Ca… [at] yahoogroups.com Subject: [Cal_Boats] refurbushing 1967 Cal 28 flushdeck ... Trying to get our Cal 28 flushdeck ready to go on the Delta Doh Dah ... and have several things to finish off ... any assistance would be greatly appreciated ... hauling out in 3 weeks ... need to replace standing rigging as well as running rigging ... top priority for the moment ... thanks in advance ------------------------------------ Yahoo! Groups Links

I met Steve Seal at Caltopia a few years ago. He worked at Jensen in the 60's and now has a rigging shop in the Bay Area. http://www.sealsspars.com/ He should be able to help you. Duane Knize /Marlyn/ 1978 Cal 2-39 #18 Berthed: Emery Cove On 5/13/2012 10:14 PM, jreissenweber wrote: > > Trying to get our Cal 28 flushdeck ready to go on the Delta Doh Dah > ... and have several things to finish off ... any assistance would be > greatly appreciated ... hauling out in 3 weeks ... need to replace > standing rigging as well as running rigging ... top priority for the > moment ... thanks in advance > >

Also Jay Butler @ Berkeley Marine Center is a GREAT RIGGER ed & helen From: Duane Knize <kn… [at] san.rr.com> To: Ca… [at] yahoogroups.com Sent: Tue, May 15, 2012 8:39:02 AM Subject: Re: [Cal_Boats] refurbushing 1967 Cal 28 flushdeck ... I met Steve Seal at Caltopia a few years ago. He worked at Jensen in the 60's and now has a rigging shop in the Bay Area. http://www.sealsspars.com/ He should be able to help you. Duane Knize Marlyn 1978 Cal 2-39 #18 Berthed: Emery Cove On 5/13/2012 10:14 PM, jreissenweber wrote: >Trying to get our Cal 28 flushdeck ready to go on the Delta Doh Dah ... and have >several things to finish off ... any assistance would be greatly appreciated ... >hauling out in 3 weeks ... need to replace standing rigging as well as running >rigging ... top priority for the moment ... thanks in advance > >

Steve will tell what you don't need, he is a man of honor! I have raced with him and against him since 1973. Use Seal's Spars if you can, you will not be disappointed! My Best, Mike Farrell From: Helen Horn <he… [at] sbcglobal.net> To: Ca… [at] yahoogroups.com Sent: Tuesday, May 15, 2012 9:34 AM Subject: Re: [Cal_Boats] refurbushing 1967 Cal 28 flushdeck ... Also Jay Butler @ Berkeley Marine Center is a GREAT RIGGER ed & helen From: Duane Knize <kn… [at] san.rr.com> To: Ca… [at] yahoogroups.com Sent: Tue, May 15, 2012 8:39:02 AM Subject: Re: [Cal_Boats] refurbushing 1967 Cal 28 flushdeck ... I met Steve Seal at Caltopia a few years ago. He worked at Jensen in the 60's and now has a rigging shop in the Bay Area. http://www.sealsspars.com/ He should be able to help you. Duane Knize Marlyn 1978 Cal 2-39 #18 Berthed: Emery Cove On 5/13/2012 10:14 PM, jreissenweber wrote: >Trying to get our Cal 28 flushdeck ready to go on the Delta Doh Dah ... and have several things to finish off ... any assistance would be greatly appreciated ... hauling out in 3 weeks ... need to replace standing rigging as well as running rigging ... top priority for the moment ... thanks in advance > >

Steve was Cal20 National Champion in 1977 From: Duane Knize <kn… [at] san.rr.com> To: Ca… [at] yahoogroups.com Sent: Tuesday, May 15, 2012 8:38 AM Subject: Re: [Cal_Boats] refurbushing 1967 Cal 28 flushdeck ... I met Steve Seal at Caltopia a few years ago. He worked at Jensen in the 60's and now has a rigging shop in the Bay Area. http://www.sealsspars.com/ He should be able to help you. Duane Knize Marlyn 1978 Cal 2-39 #18 Berthed: Emery Cove On 5/13/2012 10:14 PM, jreissenweber wrote: >Trying to get our Cal 28 flushdeck ready to go on the Delta Doh Dah ... and have several things to finish off ... any assistance would be greatly appreciated ... hauling out in 3 weeks ... need to replace standing rigging as well as running rigging ... top priority for the moment ... thanks in advance > >