Farymann stuff for sale

Hi gang. I wanted to give list folks first shot at my Farymann stuff. I repowered to Beta. Farymann stuff is getting harder and harder to find. The R-30 is a twin cylinder 24 hp. Both engines were out of a 2-34 1 R30 Farymann with a Hurth HBW-10 gear, complete was a running take out. 1 R-30 engine for parts, some newer. 1 16x10 RH prop 1 newer "rubber coupler' 1 Nanni Tanny for R-30 All must go!!! Cheap is the price Contact me off list 661-9443593

All, One project that has eluded me is painting the non-skid areas on Magic's deck. Her hull is from 1979 and the deck has never been painted. There are areas where the gel coat has worn away. I am looking into paints for the deck. My first priority is the non-skid. Googling for this, I find Petit & Interlux as well as other manufacturers. I have no experience with doing this. I'm looking for recommendations and testimonials from those that have done this: one-part, two-part, ease of application, tools & preparation, longevity, etc. Thanks, --Michael--

Kiwi grip comes highly recommended in the off shore cruising community. You may want to consider it. Worth some time doing a detailed review. http://www.pachena.com/ Lots of videos on youtube. Aint cheap. /ch On Tue, Jun 12, 2012 at 8:43 AM, Michael D <md… [at] yahoo.com> wrote: > All, > > One project that has eluded me is painting the non-skid areas on Magic's deck. Her hull is from 1979 and the deck has never been painted. There are areas where the gel coat has worn away. I am looking into paints for the deck. My first priority is the non-skid. Googling for this, I find Petit & Interlux as well as other manufacturers. I have no experience with doing this. I'm looking for recommendations and testimonials from those that have done this: one-part, two-part, ease of application, tools & preparation, longevity, etc. > > Thanks, > --Michael-- > > > > ------------------------------------ > > Yahoo! Groups Links > > > -- /ch