Re: [Cal_Boats] Rub Rail Install [1 Attachment]

Re: [Cal_Boats] Rub Rail Install [1 Attachment]

3 messages2014-05-08 18:33 UTCthrough 2014-05-09 21:53 UTC

Re: [Cal_Boats] Rub Rail Install [1 Attachment]

Gene2014-05-08 18:33 UTC
Charley what's the name and number of the guy with the repair shop that is on list a lot I think its maybe Bay Marine or something like that "Husar, Charlie [USA] (ASE)" <hu… [at] bah.com> wrote: >Hi, Bob. For you and Vince and anyone else interested, the attachment (hope it comes through) gives my rub rail install method. I’m sure there are other ways to do it, but I’ve found that this one works. > >By the by, it is not advisable to try to reinstall an old rail. Some chalk and they all stiffen. Also, curring damaged pices out for replacement is not advisable since it is hard to maintain the stretch tension. > >Hope this helps. >Take Care >Charlie >Annapolis > >From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of Bob Virgalla >Sent: Thursday, May 08, 2014 11:12 AM >To: Ca… [at] yahoogroups.com >Subject: [External] Re: [Cal_Boats] CAL 27 Rub Rail - New Title > > > > >Charlie > >My punch list this year has replacement of the rub rail on my CAL229. Given you've done more that your share of installations, and this is my 1st attempt, I'm going to tap into your expertise. > >Please fwd the instructions you mentioned in the email. > >Many thanks > >Bob Virgalla >CAL 229- Stratford CT >~~~_/)~~~

RE: [Cal_Boats] Rub Rail Install

Harleigh Ewell2014-05-08 20:54 UTC
This is probably the guy. Joe DeMers - owner Sound Marine Diesel LLC SoundMarineDiesel.com <http://www.soundmarinediesel.com/> phone & fax (860) 666-2184 Harleigh Ewell Cal 31 From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of Gene Sent: Thursday, May 08, 2014 2:34 PM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] Rub Rail Install Charley what's the name and number of the guy with the repair shop that is on list a lot I think its maybe Bay Marine or something like that "Husar, Charlie [USA] (ASE)" <hu… [at] bah.com> wrote: >Hi, Bob. For you and Vince and anyone else interested, the attachment (hope it comes through) gives my rub rail install method. I’m sure there are other ways to do it, but I’ve found that this one works. > >By the by, it is not advisable to try to reinstall an old rail. Some chalk and they all stiffen. Also, curring damaged pices out for replacement is not advisable since it is hard to maintain the stretch tension. > >Hope this helps. >Take Care >Charlie >Annapolis > >From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] On Behalf Of Bob Virgalla >Sent: Thursday, May 08, 2014 11:12 AM >To: Ca… [at] yahoogroups.com >Subject: [External] Re: [Cal_Boats] CAL 27 Rub Rail - New Title > > > > >Charlie > >My punch list this year has replacement of the rub rail on my CAL229. Given you've done more that your share of installations, and this is my 1st attempt, I'm going to tap into your expertise. > >Please fwd the instructions you mentioned in the email. > >Many thanks > >Bob Virgalla >CAL 229- Stratford CT >~~~_/)~~~

Re: [Cal_Boats] Rub Rail Install [1 Attachment]

mo… [at] aol.com2014-05-09 21:53 UTC
thank you sir. the info is appreciated! "Husar, Charlie [USA] (ASE)" <husar_charlie@... mailto:husar_charlie@...> wrote: >Hi, Bob. For you and Vince and anyone else interested, the attachment (hope it comes through) gives my rub rail install method. I’m sure there are other ways to do it, but I’ve found that this one works. > >By the by, it is not advisable to try to reinstall an old rail. Some chalk and they all stiffen. Also, curring damaged pices out for replacement is not advisable since it is hard to maintain the stretch tension. > >Hope this helps. >Take Care >Charlie >Annapolis > >From: Ca… [at] yahoogroups.com mailto:Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com mailto:Ca… [at] yahoogroups.com] On Behalf Of Bob Virgalla >Sent: Thursday, May 08, 2014 11:12 AM >To: Ca… [at] yahoogroups.com mailto:Ca… [at] yahoogroups.com >Subject: [External] Re: [Cal_Boats] CAL 27 Rub Rail - New Title > > > > >Charlie > >My punch list this year has replacement of the rub rail on my CAL229. Given you've done more that your share of installations, and this is my 1st attempt, I'm going to tap into your expertise. > >Please fwd the instructions you mentioned in the email. > >Many thanks > >Bob Virgalla >CAL 229- Stratford CT >~~~_/)~~~