Re: [Cal_Boats] tiller and bronze shaft top hardware

Hi, Joe. I’m pretty sure the CAL 29 rudder post is bigger. I am keeping you in mind in case any 25s around here contact me with needs. Take Care Charlie Annapolis From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Monday, May 19, 2014 2:18 PM To: Ca… [at] yahoogroups.com Subject: [External] Re: [Cal_Boats] tiller and bronze shaft top hardware I have both items from a Cal 25, maybe they are the same parts. Joe DeMers - owner Sound Marine Diesel LLC SoundMarineDiesel.com <http://www.soundmarinediesel.com/> phone & fax (860) 666-2184 On 5/19/2014 1:49 PM, jl… [at] yahoo.com<mailto:jl… [at] yahoo.com> [Cal_Boats] wrote: Does anyone have a tiller for a CAL-29 and/or the bronze shaft cap for sale? Best, Jeffrey --

Not sure what the dimensions are for the 29 but here’s something: http://www.catalinadirect.com/index.cfm/product/1508/tiller-head-cp-26-c-27-c-30.cfm There is a 29 in our yard that was dismasted a few years ago. It hasn’t been in the water since. I’m hoping to get to the yard this week. If the owner is around, I see what the status of that boat is. The yard is cutting-up a lot of boats that were abandoned and this one might be on the list… Steve Cal 27 #141 Elizabeth Grace Chicago, IL From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Monday, May 19, 2014 1:24 PM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] tiller and bronze shaft top hardware Hi, Joe. I’m pretty sure the CAL 29 rudder post is bigger. I am keeping you in mind in case any 25s around here contact me with needs. Take Care Charlie Annapolis From: Ca… [at] yahoogroups.com<mailto:Ca… [at] yahoogroups.com> [mailto:Ca… [at] yahoogroups.com] Sent: Monday, May 19, 2014 2:18 PM To: Ca… [at] yahoogroups.com<mailto:Ca… [at] yahoogroups.com> Subject: [External] Re: [Cal_Boats] tiller and bronze shaft top hardware I have both items from a Cal 25, maybe they are the same parts. Joe DeMers - owner Sound Marine Diesel LLC SoundMarineDiesel.com <http://www.soundmarinediesel.com/> phone & fax (860) 666-2184 On 5/19/2014 1:49 PM, jl… [at] yahoo.com<mailto:jl… [at] yahoo.com> [Cal_Boats] wrote: Does anyone have a tiller for a CAL-29 and/or the bronze shaft cap for sale? Best, Jeffrey -- This e-mail may contain privileged or confidential information. If you are not the intended recipient: (1) you may not disclose, use, distribute, copy or rely upon this message or attachment(s); and (2) please notify the sender by reply e-mail, and then delete this message and its attachment(s). Underwriters Laboratories Inc. and its affiliates disclaim all liability for any errors, omissions, corruption or virus in this message or any attachments.

Thanks Charlie - Joe On 5/19/2014 2:24 PM, 'Husar, Charlie [USA] (ASE)' hu… [at] bah.com [Cal_Boats] wrote: > > > Hi, Joe. I’m pretty sure the CAL 29 rudder post is bigger. I am > keeping you in mind in case any 25s around here contact me with needs. > > Take Care > > Charlie > > Annapolis > > *From:*Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] > *Sent:* Monday, May 19, 2014 2:18 PM > *To:* Ca… [at] yahoogroups.com > *Subject:* [External] Re: [Cal_Boats] tiller and bronze shaft top hardware > > > > I have both items from a Cal 25, maybe they are the same parts. > > *Joe DeMers - owner* > > Sound Marine Diesel LLC > > SoundMarineDiesel.com <http://www.soundmarinediesel.com/>*phone & fax > (860) 666-2184* > > > > > On 5/19/2014 1:49 PM, jl… [at] yahoo.com <mailto:jl… [at] yahoo.com> > [Cal_Boats] wrote: > > Does anyone have a tiller for a CAL-29 and/or the bronze shaft cap > for sale? > > Best, Jeffrey > > -- > > > > > > > -- *Joe DeMers - owner* Sound Marine Diesel LLC SoundMarineDiesel.com <http://www.soundmarinediesel.com/>*phone & fax (860) 666-2184*

Steve, That 29 in Windjammer is Steve Pittman's, and it had wheel steering, all it needs is a mast. David Dobbs On Monday, May 19, 2014 2:18 PM, "Joe DeMers je… [at] mindspring.com [Cal_Boats]" <Ca… [at] yahoogroups.com> wrote: Thanks Charlie - Joe On 5/19/2014 2:24 PM, 'Husar, Charlie [USA] (ASE)' hu… [at] bah.com [Cal_Boats] wrote: Hi, Joe. I’m pretty sure the CAL 29 rudder post is bigger. I am keeping you in mind in case any 25s around here contact me with needs. > >Take Care >Charlie >Annapolis > >From:Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] >Sent: Monday, May 19, 2014 2:18 PM >To: Ca… [at] yahoogroups.com >Subject: [External] Re: [Cal_Boats] tiller and bronze shaft top hardware > > > >I have both items from a Cal 25, maybe they are the same parts. >Joe DeMers - owner >Sound Marine Diesel LLC >SoundMarineDiesel.com phone & fax (860) 666-2184 > > > > > >On 5/19/2014 1:49 PM, jl… [at] yahoo.com [Cal_Boats] wrote: >Does anyone have a tiller for a CAL-29 and/or the bronze shaft cap for sale? >>Best, Jeffrey > >-- > > > > -- Joe DeMers - owner Sound Marine Diesel LLCSoundMarineDiesel.comphone & fax (860) 666-2184

The tiller post is 2 3/8 or 2.375 in. Catalana Direct has something close. The rudder cap will have to be milled out to fit. They have a tiller that fits. Randy Cal 2 29 Out Patient Sent on a Sprint Samsung Galaxy Note® 3 <div>-------- Original message --------</div><div>From: "'Husar, Charlie [USA] (ASE)' hu… [at] bah.com [Cal_Boats]" <Ca… [at] yahoogroups.com> </div><div>Date:05/19/2014 2:24 PM (GMT-05:00) </div><div>To: Ca… [at] yahoogroups.com </div><div>Subject: Re: [Cal_Boats] tiller and bronze shaft top hardware </div><div> </div>Hi, Joe. I’m pretty sure the CAL 29 rudder post is bigger. I am keeping you in mind in case any 25s around here contact me with needs. Take Care Charlie Annapolis From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Monday, May 19, 2014 2:18 PM To: Ca… [at] yahoogroups.com Subject: [External] Re: [Cal_Boats] tiller and bronze shaft top hardware I have both items from a Cal 25, maybe they are the same parts. Joe DeMers - owner Sound Marine Diesel LLC SoundMarineDiesel.com phone & fax (860) 666-2184 On 5/19/2014 1:49 PM, jl… [at] yahoo.com [Cal_Boats] wrote: Does anyone have a tiller for a CAL-29 and/or the bronze shaft cap for sale? Best, Jeffrey --