ISO a damaged/salvage unusable cal 34 hull.

I am looking for parts of the fiberglass cockpit/deck of a cal 34. there were some differences in the cockpit coaming on the original 34 vs the mk 2-3 models... but i dont think this makes any difference for what i need. I would like the rear portion of the cockpit seating area aft of the wheel/tiller, from about 6" up from the footwell up to and including the coaming... some damage may be acceptable. I can do all the work removing it if necessary, but the most difficult part is finding an old hull available for parting out. if you know of one, please feel free to contact me at ce… [at] rocketmail.com thank you...

Why not just make one from scratch? Seems easier? From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Tuesday, October 21, 2014 3:19 PM To: Ca… [at] yahoogroups.com Subject: [Cal_Boats] ISO a damaged/salvage unusable cal 34 hull. I am looking for parts of the fiberglass cockpit/deck of a cal 34. there were some differences in the cockpit coaming on the original 34 vs the mk 2-3 models... but i dont think this makes any difference for what i need. I would like the rear portion of the cockpit seating area aft of the wheel/tiller, from about 6" up from the footwell up to and including the coaming... some damage may be acceptable. I can do all the work removing it if necessary, but the most difficult part is finding an old hull available for parting out. if you know of one, please feel free to contact me at ce… [at] rocketmail.com <mailto:ce… [at] rocketmail.com> thank you...

Y not just give your self a custom transom and cockpit T cockpit add a wheel or Ice cream scoop transom and spilt the back stay. would be really cool. On Tuesday, October 21, 2014 6:50 PM, "'Timm Lessley' ti… [at] gmail.com [Cal_Boats]" <Ca… [at] yahoogroups.com> wrote: Why not just make one from scratch? Seems easier? From:Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Tuesday, October 21, 2014 3:19 PM To: Ca… [at] yahoogroups.com Subject: [Cal_Boats] ISO a damaged/salvage unusable cal 34 hull. I am looking for parts of the fiberglass cockpit/deck of a cal 34. there were some differences in the cockpit coaming on the original 34 vs the mk 2-3 models... but i dont think this makes any difference for what i need. I would like the rear portion of the cockpit seating area aft of the wheel/tiller, from about 6" up from the footwell up to and including the coaming... some damage may be acceptable. I can do all the work removing it if necessary, but the most difficult part is finding an old hull available for parting out. if you know of one, please feel free to contact me at ce… [at] rocketmail.com thank you...