Bow CAL 2-25

Bow CAL 2-25

10 messages2016-01-31 20:04 UTCthrough 2016-02-15 21:20 UTC

Bow CAL 2-25

TomDressler2016-01-31 20:04 UTC
And since we have been on the topic of 2-25’s. My ’78 is missing something at the very bow. It looks like a piece of trim was removed when a Harken roller fuller was installed and the trim was not replaced. Does anyone have a ‘complete’ bow and you can send me a pic of it? What am I missing? Here’s what mine looks like. It doesn’t leak, it’s just wrong. Apologies for the apparent potato camera. Thanks. Tom SV RESA CAL 2-25 Monterey, CA --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

Re: [Cal_Boats] Bow CAL 2-25 [1 Attachment]

keith alvord2016-02-14 23:44 UTC
From: 'TomDressler' tb… [at] verizon.net [Cal_Boats] <Ca… [at] yahoogroups.com>; To: <Ca… [at] yahoogroups.com>; Subject: [Cal_Boats] Bow CAL 2-25 [1 Attachment] Sent: Sun, Jan 31, 2016 8:04:43 PM [ Attachment(s) from TomDressler included below] And since we have been on the topic of 2-25’s. My ’78 is missing something at the very bow. It looks like a piece of trim was removed when a Harken roller fuller was installed and the trim was not replaced. Does anyone have a ‘complete’ bow and you can send me a pic of it? What am I missing? Here’s what mine looks like. It doesn’t leak, it’s just wrong. Apologies for the apparent potato camera. Thanks. Tom SV RESA CAL 2-25 Monterey, CA This email has been checked for viruses by Avast antivirus software. www.avast.com

Re: [Cal_Boats] Bow CAL 2-25 [2 Attachments]

keith alvord2016-02-15 00:16 UTC
Hope this helps. I am looking for the rub rail insert, I would like to keep the setup I have and just buy the rubber insert, and ideas? Thanks, Keith SV Coho, 1978 Cal 225 Redding, CA.

RE: [Cal_Boats] Bow CAL 2-25

Charlie Husar2016-02-15 00:42 UTC
Hi, Keith. Go on the web to Taco Marine (also called Taco Metals), and see if anything fits the bill.

Re: [Cal_Boats] Bow CAL 2-25

Mike's Yahoo2016-02-15 01:25 UTC
I will take a picture of my bow tomorrow. I think Charlie's assessment is right, it might be something added not missing. As for the rub rail insert question, I've heard of 2-25 owners replacing the original 2-part rubrail with a rubber gunnel, like the original flat top Cal 25 or Cal 20. If your 2-25 is a 2 part with an insert, I think you'll have measure the insert with calipers or something. Taco is a big supplier, and may even have a display at your local boat store. I also saw that a co called Great Lakes Skipper has a 1" insert in beige, if that is the right size and color. Best, Mike Casillo Cal 2-25 Annapolis > On Feb 14, 2016, at 7:42 PM, 'Charlie Husar' hu… [at] gmail.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: > > Hi, Keith. Go on the web to Taco Marine (also called Taco Metals), and see if anything fits the bill. > > > > From the photos of the 2-25 bow, it looks like a block of something was added instead of something being missing. Is the original rub rail supposed to wrap around the bow in front of the tang? > > > > Take Care > > Charlie > > Frigid Annapolis > > CAL 25 > > > > From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] > Sent: Sunday, February 14, 2016 7:17 PM > To: Cal_Boats <Ca… [at] yahoogroups.com> > Subject: Re: [Cal_Boats] Bow CAL 2-25 > > > > > > > > Hope this helps. I am looking for the rub rail insert, I would like to keep the setup I have and just buy the rubber insert, and ideas? > Thanks, Keith > > SV Coho, 1978 Cal 225 > Redding, CA. > > > > From: keith alvord ba… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com>; > To: Cal_Boats <Ca… [at] yahoogroups.com>; > Subject: Re: [Cal_Boats] Bow CAL 2-25 [2 Attachments] > Sent: Sun, Feb 14, 2016 11:44:52 PM > > > > > > [Attachment(s) from keith alvord included below] > > > > From: 'TomDressler' tb… [at] verizon.net [Cal_Boats] <Ca… [at] yahoogroups.com>; > To: <Ca… [at] yahoogroups.com>; > Subject: [Cal_Boats] Bow CAL 2-25 [1 Attachment] > Sent: Sun, Jan 31, 2016 8:04:43 PM > > > > > > [Attachment(s) from TomDressler included below] > > And since we have been on the topic of 2-25’s. > > My ’78 is missing something at the very bow. > > It looks like a piece of trim was removed when a Harken roller fuller was installed and the trim was not replaced. > > Does anyone have a ‘complete’ bow and you can send me a pic of it? What am I missing? > > Here’s what mine looks like. It doesn’t leak, it’s just wrong. > > > > Apologies for the apparent potato camera. > > Thanks. > > > > Tom > > SV RESA CAL 2-25 > Monterey, CA > > > > > > This email has been checked for viruses by Avast antivirus software. > www.avast.com > > > > > > >

Re: [Cal_Boats] Bow CAL 2-25 and today on Monterey Bay

TomDressler2016-02-15 04:04 UTC
Yessir. That looks like it. Thanks Keith! What is that thing? Is it metal? And its for ramming? :-) I need rubrails also. I'll check that Taco Metals. ..tom Monterey, Ca Resa Cal 2-25 > On Feb 14, 2016, at 4:16 PM, keith alvord ba… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: > > > Hope this helps. I am looking for the rub rail insert, I would like to keep the setup I have and just buy the rubber insert, and ideas? > Thanks, Keith > > SV Coho, 1978 Cal 225 > Redding, CA. > > From: keith alvord ba… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com>; > To: Cal_Boats <Ca… [at] yahoogroups.com>; > Subject: Re: [Cal_Boats] Bow CAL 2-25 [2 Attachments] > Sent: Sun, Feb 14, 2016 11:44:52 PM > > > [Attachment(s) from keith alvord included below] > > From: 'TomDressler' tb… [at] verizon.net [Cal_Boats] <Ca… [at] yahoogroups.com>; > To: <Ca… [at] yahoogroups.com>; > Subject: [Cal_Boats] Bow CAL 2-25 [1 Attachment] > Sent: Sun, Jan 31, 2016 8:04:43 PM > > > [Attachment(s) from TomDressler included below] > And since we have been on the topic of 2-25’s. > > My ’78 is missing something at the very bow. > > It looks like a piece of trim was removed when a Harken roller fuller was installed and the trim was not replaced. > > Does anyone have a ‘complete’ bow and you can send me a pic of it? What am I missing? > > Here’s what mine looks like. It doesn’t leak, it’s just wrong. > > > > Apologies for the apparent potato camera. > > Thanks. > > > > Tom > > SV RESA CAL 2-25 > Monterey, CA > > > > > This email has been checked for viruses by Avast antivirus software. > www.avast.com > > >

Re: [Cal_Boats] Bow CAL 2-25 and today on Monterey Bay

keith alvord2016-02-15 15:22 UTC
Yes Tom, it is painted metal. I have not used it for ramming, but give me time and I&#39;m sure I&#39;ll hit something. Keith

Re: [Cal_Boats] Bow CAL 2-25

Mike's Yahoo2016-02-15 20:46 UTC
For what it's worth, I've attached a picture of my bow. Best, Mike Casillo Cal 2-25 Annapolis > On Feb 14, 2016, at 8:25 PM, Mike's Yahoo mi… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: > > > I will take a picture of my bow tomorrow. I think Charlie's assessment is right, it might be something added not missing. > > As for the rub rail insert question, I've heard of 2-25 owners replacing the original 2-part rubrail with a rubber gunnel, like the original flat top Cal 25 or Cal 20. If your 2-25 is a 2 part with an insert, I think you'll have measure the insert with calipers or something. Taco is a big supplier, and may even have a display at your local boat store. I also saw that a co called Great Lakes Skipper has a 1" insert in beige, if that is the right size and color. > > Best, > > Mike Casillo > Cal 2-25 > Annapolis > > >> On Feb 14, 2016, at 7:42 PM, 'Charlie Husar' hu… [at] gmail.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: >> >> >> Hi, Keith. Go on the web to Taco Marine (also called Taco Metals), and see if anything fits the bill. >> >> >> >> From the photos of the 2-25 bow, it looks like a block of something was added instead of something being missing. Is the original rub rail supposed to wrap around the bow in front of the tang? >> >> >> >> Take Care >> >> Charlie >> >> Frigid Annapolis >> >> CAL 25 >> >> >> >> From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] >> Sent: Sunday, February 14, 2016 7:17 PM >> To: Cal_Boats <Ca… [at] yahoogroups.com> >> Subject: Re: [Cal_Boats] Bow CAL 2-25 >> >> >> >> >> >> >> >> Hope this helps. I am looking for the rub rail insert, I would like to keep the setup I have and just buy the rubber insert, and ideas? >> Thanks, Keith >> >> SV Coho, 1978 Cal 225 >> Redding, CA. >> >> >> >> From: keith alvord ba… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com>; >> To: Cal_Boats <Ca… [at] yahoogroups.com>; >> Subject: Re: [Cal_Boats] Bow CAL 2-25 [2 Attachments] >> Sent: Sun, Feb 14, 2016 11:44:52 PM >> >> >> >> >> >> [Attachment(s) from keith alvord included below] >> >> >> >> From: 'TomDressler' tb… [at] verizon.net [Cal_Boats] <Ca… [at] yahoogroups.com>; >> To: <Ca… [at] yahoogroups.com>; >> Subject: [Cal_Boats] Bow CAL 2-25 [1 Attachment] >> Sent: Sun, Jan 31, 2016 8:04:43 PM >> >> >> >> >> >> [Attachment(s) from TomDressler included below] >> >> And since we have been on the topic of 2-25’s. >> >> My ’78 is missing something at the very bow. >> >> It looks like a piece of trim was removed when a Harken roller fuller was installed and the trim was not replaced. >> >> Does anyone have a ‘complete’ bow and you can send me a pic of it? What am I missing? >> >> Here’s what mine looks like. It doesn’t leak, it’s just wrong. >> >> >> >> Apologies for the apparent potato camera. >> >> Thanks. >> >> >> >> Tom >> >> SV RESA CAL 2-25 >> Monterey, CA >> >> >> >> >> >> This email has been checked for viruses by Avast antivirus software. >> www.avast.com >> > >

RE: [Cal_Boats] Bow CAL 2-25 [1 Attachment]

TomDressler2016-02-15 20:59 UTC
Thanks Mike. Clearly, something is missing from my bow. What’s that stuff floating in the water? : ) From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Monday, February 15, 2016 12:47 PM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] Bow CAL 2-25 [1 Attachment] [Attachment(s) from Mike's Yahoo included below] For what it's worth, I've attached a picture of my bow. Best, Mike Casillo Cal 2-25 Annapolis image1.JPG On Feb 14, 2016, at 8:25 PM, Mike's Yahoo mi… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: I will take a picture of my bow tomorrow. I think Charlie's assessment is right, it might be something added not missing. As for the rub rail insert question, I've heard of 2-25 owners replacing the original 2-part rubrail with a rubber gunnel, like the original flat top Cal 25 or Cal 20. If your 2-25 is a 2 part with an insert, I think you'll have measure the insert with calipers or something. Taco is a big supplier, and may even have a display at your local boat store. I also saw that a co called Great Lakes Skipper has a 1" insert in beige, if that is the right size and color. Best, Mike Casillo Cal 2-25 Annapolis On Feb 14, 2016, at 7:42 PM, 'Charlie Husar' hu… [at] gmail.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: Hi, Keith. Go on the web to Taco Marine (also called Taco Metals), and see if anything fits the bill.

RE: [Cal_Boats] Bow CAL 2-25

Charlie Husar2016-02-15 21:20 UTC
All Cals I have seen have a small metal cowl near the stern on each side that through-bolts the rub rail end to hold it in place. It looks like the 2-25 has a similar arrangement at the front. I guess this goes with the insert type of rail. I would have thought that the rubber part of the rail would wrap around the tang on the bow. Learn something new every day. Today’s Tip: Don’t walk down the dock with your keys or your wallet in your hand. Take Care Charlie Annapolis CAL 25 From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Monday, February 15, 2016 4:00 PM To: Ca… [at] yahoogroups.com; 'Mike's Yahoo' <mi… [at] yahoo.com> Subject: RE: [Cal_Boats] Bow CAL 2-25 Thanks Mike. Clearly, something is missing from my bow. What’s that stuff floating in the water? : ) From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Monday, February 15, 2016 12:47 PM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] Bow CAL 2-25 [1 Attachment] [Attachment(s) from Mike's Yahoo included below] For what it's worth, I've attached a picture of my bow. Best, Mike Casillo Cal 2-25 Annapolis On Feb 14, 2016, at 8:25 PM, Mike's Yahoo mi… [at] yahoo.com <mailto:mi… [at] yahoo.com> [Cal_Boats] <Ca… [at] yahoogroups.com <mailto:Ca… [at] yahoogroups.com> > wrote: I will take a picture of my bow tomorrow. I think Charlie's assessment is right, it might be something added not missing. As for the rub rail insert question, I've heard of 2-25 owners replacing the original 2-part rubrail with a rubber gunnel, like the original flat top Cal 25 or Cal 20. If your 2-25 is a 2 part with an insert, I think you'll have measure the insert with calipers or something. Taco is a big supplier, and may even have a display at your local boat store. I also saw that a co called Great Lakes Skipper has a 1" insert in beige, if that is the right size and color. Best, Mike Casillo Cal 2-25 Annapolis On Feb 14, 2016, at 7:42 PM, 'Charlie Husar' hu… [at] gmail.com <mailto:hu… [at] gmail.com> [Cal_Boats] <Ca… [at] yahoogroups.com <mailto:Ca… [at] yahoogroups.com> > wrote: Hi, Keith. Go on the web to Taco Marine (also called Taco Metals), and see if anything fits the bill.