2-27 rudder question

blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Okay so I had to repair a repair poorly done by previous owner. I took the boat down to gel coat and barrier/bottom painted. When I reinstalled the rudder I noticed I may have fattened it up a bit. It doesn't seem to swing far enough either direction. It looks nice and has a smooth radius. I'm heading back to grind it down. Can anyone give any insight into how much I should remove? How far should it swing? I hope I've described the problem well enough. Sent from Yahoo Mail for iPhone

blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Well a little googling and seems 30-35 degrees is all I need. I might already have that. Guy beside me last week said it looked wrong. Can't wait to check tomorrow. Sent from Yahoo Mail for iPhone On Friday, June 9, 2017, 7:39 PM, david howe tr… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: Okay so I had to repair a repair poorly done by previous owner. I took the boat down to gel coat and barrier/bottom painted. When I reinstalled the rudder I noticed I may have fattened it up a bit. It doesn't seem to swing far enough either direction. It looks nice and has a smooth radius. I'm heading back to grind it down. Can anyone give any insight into how much I should remove? How far should it swing? I hope I've described the problem well enough. Sent from Yahoo Mail for iPhone