Re: [Cal_Boats] Cal 39

Re: [Cal_Boats] Cal 39

2 messages2012-09-05 15:12 UTCthrough 2017-12-05 17:32 UTC

Re: [Cal_Boats] Cal 39

pw… [at] aol.com2012-09-05 15:12 UTC
Sam - The previous owner of our boat had a new boom made with the Harken outhaul track. It was made my Mars Metal works and works great. We have a triple reef setup inside the boom and the outhaul is led aft. We are racing tonight so I will take some pics for you and shoot them out in the next day or two. Paul West Adventure Kwest '80 Cal 39 In a message dated 9/5/2012 1:01:36 A.M. Eastern Daylight Time, sa… [at] lavanaway.org writes: I own hull 154 and totally love the boat. I am looking at little tweeks... and could use some sage help. I wondered if anyone knew the manufacturer of the mast/boom on a 1983 Call 39? Standard rig. The end cap needs to be replaced/rebuilt as one of the two tangs above the reefing blocks broke. I would also like to find a better 'outhaul'. The previous owner went to loose footed and went with a low tech, high-friction outhaul. 10 inches of track and a car with bearing would make this better. Any ideas? Thanks, Sam

Re: [Cal_Boats] cal 39

pw… [at] aol.com2017-12-05 17:32 UTC
Welcome! I'm another Cal 39 owner. We have an '80 MKIII on the Chesapeake Bay and sail & race out of Cambridge. Paul West Adventure Kwest From: Patricia Dahlgren rp… [at] sbcglobal.net [Cal_Boats] <Ca… [at] yahoogroups.com> To: Cal_Boats <Ca… [at] yahoogroups.com> Sent: Tue, Dec 5, 2017 12:16 pm Subject: [Cal_Boats] cal 39 Just joining up.