Whats wrong ? With these windos

These windo s look miss installed ? Port windows seem cross eyed ? Any suggestions. Cal 39 mk II Thanks edward.

When the windows are re-bedded, it can be difficult to keep the frame level in the cutout. The tend to sag in caulk and rest on the lower part of the cutout. I secured mine in position with gorilla tape until they set. > On Oct 21, 2018, at 8:04 AM, Edward Stancil e.… [at] gmail.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: > > [Attachment(s) from Edward Stancil included below] > These windo s look miss installed ? > > Port windows seem cross eyed ? > > Any suggestions. Cal 39 mk II > Thanks edward. >

hysterical

Yah. Im think looks wrong Wounded sort of .. Nexttime im at boat ill check LOF stickers on safety glass.. I was hoping someone would Say filp ft. Windo end to end Or put windo 2 in windo1 cutout. After you turn it over .. Thanks edward A nother reason to do one at a Time..when rebedding On Sun, Oct 21, 2018, 6:51 AM Kieran Dooley so… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: > > > When the windows are re-bedded, it can be difficult to keep the frame > level in the cutout. The tend to sag in caulk and rest on the lower part of > the cutout. I secured mine in position with gorilla tape until they set. > > Sent from my iPhone > > On Oct 21, 2018, at 8:04 AM, Edward Stancil e.… [at] gmail.com > [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: > > > > These windo s look miss installed ? > > Port windows seem cross eyed ? > > Any suggestions. Cal 39 mk II > Thanks edward. > > >

you might have two larger sloped and two smaller sloped windows or two rectangles and two sloped windows. that could be the problem. if not then just the forward one needs to flip john b s/v 1983 catalina 27 On Sunday, October 21, 2018, 1:43:32 PM CDT, Edward Stancil e.… [at] gmail.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: Yah. Im think looks wrong Wounded sort of ..Nexttime im at boat ill check LOF stickers on safety glass.. I was hoping someone wouldSay filp ft. Windo end to end Or put windo 2 in windo1 cutout.After you turn it over .. Thanks edwardA nother reason to do one at aTime..when rebedding On Sun, Oct 21, 2018, 6:51 AM Kieran Dooley so… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: When the windows are re-bedded, it can be difficult to keep the frame level in the cutout. The tend to sag in caulk and rest on the lower part of the cutout. I secured mine in position with gorilla tape until they set. On Oct 21, 2018, at 8:04 AM, Edward Stancil e.… [at] gmail.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: These windo s look miss installed ? Port windows seem cross eyed ? Any suggestions. Cal 39 mk IIThanks edward.