Free stuff

Cleaning out garage and found some stuff that might be of interest: 2 ea, mast collars for Cal 29 Mk2 (Kenyon 6092 section). Custom made but not yet fully finished (corners still sharp and not passivated). Material is 316 SS. Free to anybody that wants them (or one). Just pay for shipping. Each weighs around 10 lbs. Jeff Thayer S/V Ecco Cal 39 Mk2 San Francisco, Ca

I wonder if it would fit my Cal 31? I'm in Santa Cruz. Maybe I could come take a look? Chris Sent from Yahoo Mail on Android On Sat, Nov 10, 2018 at 8:22 AM, Jeff Thayer je… [at] comcast.net [Cal_Boats]<Ca… [at] yahoogroups.com> wrote: [Attachment(s) from Jeff Thayer included below] Cleaning out garage and found some stuff that might be of interest: 2 ea, mast collars for Cal 29 Mk2 (Kenyon 6092 section). Custom made but not yet fully finished (corners still sharp and not passivated). Material is 316 SS. Free to anybody that wants them (or one). Just pay for shipping. Each weighs around 10 lbs. Jeff ThayerS/V EccoCal 39 Mk2San Francisco, Ca

Chris, go to Rig-Rite site that has a long list of Kenyon spars. 6092 is included. http://www.rigrite.com/Spars/Kenyon_Spars/KENYON.php#Kenyon%20Mast%20Sections You might be able to do some measurements on your boat based on the data. Hope this Helps Charlie Annapolis From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Saturday, November 10, 2018 11:53 AM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] Free stuff [2 Attachments] [Attachment(s) from Chris included below] I wonder if it would fit my Cal 31? I'm in Santa Cruz. Maybe I could come take a look? Chris Sent from Yahoo Mail on Android <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> On Sat, Nov 10, 2018 at 8:22 AM, Jeff Thayer je… [at] comcast.net <mailto:je… [at] comcast.net> [Cal_Boats] <Ca… [at] yahoogroups.com <mailto:Ca… [at] yahoogroups.com> > wrote: [Attachment(s) from Jeff Thayer included below] Cleaning out garage and found some stuff that might be of interest: 2 ea, mast collars for Cal 29 Mk2 (Kenyon 6092 section). Custom made but not yet fully finished (corners still sharp and not passivated). Material is 316 SS. Free to anybody that wants them (or one). Just pay for shipping. Each weighs around 10 lbs. Jeff Thayer S/V Ecco Cal 39 Mk2 San Francisco, Ca

you are welcome to come look at it. I’m in Montara (just north of Half Moon Bay). The opening for the mast is 10” x 6.75” (a big stick). Jeff > On Nov 10, 2018, at 8:52 AM, Chris ch… [at] yahoo.com [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: > > [Attachment(s) <x-msg://13/#TopText> from Chris included below] > I wonder if it would fit my Cal 31? > > > I'm in Santa Cruz. Maybe I could come take a look? > > Chris > > Sent from Yahoo Mail on Android <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > On Sat, Nov 10, 2018 at 8:22 AM, Jeff Thayer je… [at] comcast.net <mailto:je… [at] comcast.net> [Cal_Boats] > <Ca… [at] yahoogroups.com <mailto:Ca… [at] yahoogroups.com>> wrote: > > [Attachment(s) <x-msg://13/#TopText> from Jeff Thayer included below] > Cleaning out garage and found some stuff that might be of interest: > > 2 ea, mast collars for Cal 29 Mk2 (Kenyon 6092 section). Custom made but not yet fully finished (corners still sharp and not passivated). Material is 316 SS. Free to anybody that wants them (or one). > Just pay for shipping. Each weighs around 10 lbs. > > Jeff Thayer > S/V Ecco > Cal 39 Mk2 > San Francisco, Ca > > > > > > >

Charlie, thank you, I never knew this existed, it will help me get the outhaul and topping lift sheaves I desperately need..the old ones are crumbling on Caliente, yay! Helen Sent from Yahoo Mail on Android On Sat, Nov 10, 2018 at 9:01 AM, 'Charlie Husar' hu… [at] gmail.com [Cal_Boats]<Ca… [at] yahoogroups.com> wrote: Chris, go to Rig-Rite site that has a long list of Kenyon spars. 6092 is included. http://www.rigrite.com/Spars/Kenyon_Spars/KENYON.php#Kenyon%20Mast%20Sections You might be able to do some measurements on your boat based on the data. Hope this Helps Charlie Annapolis From: Ca… [at] yahoogroups.com [mailto:Ca… [at] yahoogroups.com] Sent: Saturday, November 10, 2018 11:53 AM To: Ca… [at] yahoogroups.com Subject: Re: [Cal_Boats] Free stuff [2 Attachments] [Attachment(s) from Chris included below] I wonder if it would fit my Cal 31? I'm in Santa Cruz. Maybe I could come take a look? Chris Sent from Yahoo Mail on Android On Sat, Nov 10, 2018 at 8:22 AM, Jeff Thayer je… [at] comcast.net [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: [Attachment(s) from Jeff Thayer included below] Cleaning out garage and found some stuff that might be of interest: 2 ea, mast collars for Cal 29 Mk2 (Kenyon 6092 section). Custom made but not yet fully finished (corners still sharp and not passivated). Material is 316 SS. Free to anybody that wants them (or one). Just pay for shipping. Each weighs around 10 lbs. Jeff Thayer S/V Ecco Cal 39 Mk2 San Francisco, Ca

Helen, be forewarned….not everything listed is readily available. I’ve been waiting for a replacement gooseneck fitting from Rigrite for over two years….. Jeff > On Nov 10, 2018, at 9:53 AM, Helen Horn he… [at] sbcglobal.net [Cal_Boats] <Ca… [at] yahoogroups.com> wrote: > > Charlie, thank you, I never knew this existed, it will help me get the outhaul and topping lift sheaves I desperately need..the old ones are crumbling on Caliente, yay! Helen > > > Sent from Yahoo Mail on Android <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > On Sat, Nov 10, 2018 at 9:01 AM, 'Charlie Husar' hu… [at] gmail.com <mailto:hu… [at] gmail.com> [Cal_Boats] > <Ca… [at] yahoogroups.com <mailto:Ca… [at] yahoogroups.com>> wrote: > > > Chris, go to Rig-Rite site that has a long list of Kenyon spars. 6092 is included. > > > http://www.rigrite.com/Spars/Kenyon_Spars/KENYON.php#Kenyon%20Mast%20Sections <http://www.rigrite.com/Spars/Kenyon_Spars/KENYON.php#Kenyon%20Mast%20Sections> > > You might be able to do some measurements on your boat based on the data. > > > Hope this Helps > > Charlie > > Annapolis > > > > From: Ca… [at] yahoogroups.com <mailto:Ca… [at] yahoogroups.com> [mailto:Ca… [at] yahoogroups.com <mailto:Ca… [at] yahoogroups.com>] > Sent: Saturday, November 10, 2018 11:53 AM > To: Ca… [at] yahoogroups.com <mailto:Ca… [at] yahoogroups.com> > Subject: Re: [Cal_Boats] Free stuff [2 Attachments] > > > [Attachment(s) <x-msg://15/#TopText> from Chris included below] > > I wonder if it would fit my Cal 31? > > > I'm in Santa Cruz. Maybe I could come take a look? > > > Chris > > Sent from Yahoo Mail on Android <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Sat, Nov 10, 2018 at 8:22 AM, Jeff Thayer je… [at] comcast.net <mailto:je… [at] comcast.net> [Cal_Boats] > > <Ca… [at] yahoogroups.com <mailto:Ca… [at] yahoogroups.com>> wrote: > > > [Attachment(s) <x-msg://15/#TopText> from Jeff Thayer included below] > > Cleaning out garage and found some stuff that might be of interest: > > 2 ea, mast collars for Cal 29 Mk2 (Kenyon 6092 section). Custom made but not yet fully finished (corners still sharp and not passivated). Material is 316 SS. Free to anybody that wants them (or one). > > Just pay for shipping. Each weighs around 10 lbs. > > > Jeff Thayer > > S/V Ecco > > Cal 39 Mk2 > > San Francisco, Ca > > > > > > > > > > > > > >

It would be nice to have a listing on which spars were used on which Cals. I would take it in an instant if it fit either my Cal 27 T/2 or my Cal Cruising 36. Reggie Sent from Outlook<http://aka.ms/weboutlook> From: Ca… [at] yahoogroups.com <Ca… [at] yahoogroups.com> on behalf of Jeff Thayer je… [at] comcast.net [Cal_Boats] <Ca… [at] yahoogroups.com> Sent: Saturday, November 10, 2018 1:59 PM To: Ca… [at] yahoogroups.com; he… [at] sbcglobal.net Subject: Re: [Cal_Boats] Free stuff Helen, be forewarned….not everything listed is readily available. I’ve been waiting for a replacement gooseneck fitting from Rigrite for over two years….. Jeff On Nov 10, 2018, at 9:53 AM, Helen Horn he… [at] sbcglobal.net<mailto:he… [at] sbcglobal.net> [Cal_Boats] <Ca… [at] yahoogroups.com<mailto:Ca… [at] yahoogroups.com>> wrote: Charlie, thank you, I never knew this existed, it will help me get the outhaul and topping lift sheaves I desperately need..the old ones are crumbling on Caliente, yay! Helen Sent from Yahoo Mail on Android<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> On Sat, Nov 10, 2018 at 9:01 AM, 'Charlie Husar' hu… [at] gmail.com<mailto:hu… [at] gmail.com> [Cal_Boats] <Ca… [at] yahoogroups.com<mailto:Ca… [at] yahoogroups.com>> wrote: Chris, go to Rig-Rite site that has a long list of Kenyon spars. 6092 is included. http://www.rigrite.com/Spars/Kenyon_Spars/KENYON.php#Kenyon%20Mast%20Sections You might be able to do some measurements on your boat based on the data. Hope this Helps Charlie Annapolis From: Ca… [at] yahoogroups.com<mailto:Ca… [at] yahoogroups.com> [mailto:Ca… [at] yahoogroups.com] Sent: Saturday, November 10, 2018 11:53 AM To: Ca… [at] yahoogroups.com<mailto:Ca… [at] yahoogroups.com> Subject: Re: [Cal_Boats] Free stuff [2 Attachments] [Attachment(s) from Chris included below] I wonder if it would fit my Cal 31? I'm in Santa Cruz. Maybe I could come take a look? Chris Sent from Yahoo Mail on Android<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> On Sat, Nov 10, 2018 at 8:22 AM, Jeff Thayer je… [at] comcast.net<mailto:je… [at] comcast.net> [Cal_Boats] <Ca… [at] yahoogroups.com<mailto:Ca… [at] yahoogroups.com>> wrote: [Attachment(s) from Jeff Thayer included below] Cleaning out garage and found some stuff that might be of interest: 2 ea, mast collars for Cal 29 Mk2 (Kenyon 6092 section). Custom made but not yet fully finished (corners still sharp and not passivated). Material is 316 SS. Free to anybody that wants them (or one). Just pay for shipping. Each weighs around 10 lbs. Jeff Thayer S/V Ecco Cal 39 Mk2 San Francisco, Ca